Handle Extension (2022+) - Single Sided and Forward Handle Rear Stands

This handle extension was designed for our 2022+ Single Sided Swingarm Rear Stands and Forward Handle Rear Stands. Since the base of those handles will touch the ground, you cannot simply lengthen the handle. You need an extension that has an offset angle in order to keep the extension from contacting the ground and altering the angle of the upright tube on the stand.

This handle extension will add a significant amount of leverage for those who struggle to lift their bike using the traditional length handle. 90% of our customers will not need this handle extension, so do not feel like it is a necessity to lift the bike. It is only available for those who need the additional leverage.

If you have a 2022 or newer stand, your handle(where it touches the ground) will be covered with a black plastic tip instead of a solid steel tip found on our older stands. The newer stands can use the F0099AA-002 handle. The older stands with the steel tip use the F0099AA-001 handle.

Note: BMW cylinder heads will force you to use the stand in the rear-facing handle orientation when using the handle extension.