Skip to main content
Motorcycle Model Loading...
Make is required!
Jack Stands (Foot Peg Stands)

Jack Stands (Foot Peg Stands)

4 reviews Write a review

$197.95


  • Part Number: F0062-000
  • Availability: In Stock Ships within 1-2 business days

Qty required!

Released in 2007, our Pit Bull Jack Stands will allow your sport motorcycle to rest on the frame sliders and/or the rear footpegs. Height is adjustable to 14 different settings(14.5" - 27.5").  Ideal for solid mount foot pegs, but can be used on some "flip-up" foot pegs so long as there is a sufficiently large enough base to "grab".  Sold as a pair of two.

U.S. Patent No. D554,025

Height Adjustment: 14.5" - 27.5"

Can be used on flip-up pegs by placing Jackstand Cups under base of peg. If you are not certain that your pegs have enough surface area contact to lift from the base securely, do not use the product. Email us photos and measurements and we will do our best to assist.

HCM 06/07/2024
I have been using a set of these stands for years... very, very useful tool to have in the garage and at the track.
I have had many a bike perched on these stands over the years and have never had any issues. The stands are very stable.
The height of the stands can be adjusted to suit your needs.
Bob Brown 10/09/2023
These stands are great for their intended purpose. To address Jenna H's comment, they're JACK STANDS. Just like jack stands for a car, you have to jack up the car and then place the jack stands underneath the car once you jack it up to the desired height and lower the vehicle down onto the stands. My first experience with these was at the track. I had to drop my triples. I borrowed these from a fellow racer and they worked marvelously under my frame sliders to support the front end. At home, I have a chain suspended from the rafters in the garage and run a ratchet strap through the frame. And while that works, these stands are so much better than doing that. The front end sways and moves with the straps, but is firmly planted with the stands. They saved my day at the track. They're very portable and easy to use. I will be purchasing a set.
Riders Choice 06/17/2022
We have a set for each bench, and sell many kits. These work as intended and are excellent quality.
Jenna H 06/01/2022
These stands CANNOT be used on their own. They CANNOT adjust the height of the bike stance on their own. To fully lift the bike, you need 4 stands / 2 sets of pairs, AND you need a separate front/rear wheel stand.

I needed to replace components of my front forks, so I saw that a basic front (fork) and rear (spool) stand would not work. I saw these and thought: "Yes! A stand that does not depend on the front fork! Count me in."

However, my fault for making it too simple.

Get a hydraulic, center stand. Or, something less laborious, more flexible, and more universally used. In the end, I have spent more money on a pair of these + rear and front stands than I would have spent on a more shop-like, hands-off, automatic lift. And yet, I have to work and coordinate between 4 manual, rigid stands to get this propped even a couple inches off the ground; no flexibility.

Write a review

Warning: Review Name must be between 3 and 25 characters!
Warning: Please select a review rating!
Warning: Review Text must be between 25 and 1000 characters!
Note: HTML is not translated!
Back to top