Elite One Armed Rear - BMW R1250 models

Our new Elite One Armed Rear Stand was designed with features that are very helpful to lift the R1250 model BMW's due to the heavy weight of that bike. The design features a lower cross tube for increased tire clearance as well as an overall lower height for more leverage. It also features a support brace for increased rigidity, which helps maintain the slight positive angle found in the stand(to keep the bike inclined towards the stand). This stand could be used on other motorcycles with single sided swingarms but the primary benefit would be increased leverage and rigidity. Sold complete with pin to fit the BMW single sided hub found on the R1250, R1200, K1300, and R9T models, but pins are interchangeable to fit other bikes.

NOTE: While this Pit Bull stand is capable of lifting many bikes from both sides, it is only intended for use on the drive side of the BMWs using our Elite One Armed Rear. If you own more than one single sided swingarm bike, you can still use this stand on both sides of that bike if Pit Bull pins are available for both sides of that motorcycle.

EXTENDED HANDLE OPTION: The R1250 is a heavy bike. Pit Bull strongly recommends the handle extension option for this bike. For reference, George is 230 lbs. and can lift the bike without the extension. Kelly is 180 lbs. and lifts weights regularly and can just barely lift the bike without the extension. By our estimation, 80% of our customers are likely to need the handle extension to lift the R1250GSA. We do not want to "force" this option on anyone, but please consider it if you have back issues are an average sized human.